widemoldcontainera

The transformation of the bottle blowing machine by the frequency converter makes the current of the motor many times higher than the rated current, which will affect the service life of the motor in the long run. Actively carry out product innovation, on the basis of completing the basic functions of the bottle blowing machine, strive to reduce energy consumption as much as possible, and produce energy-saving bottle blowing machines.

The main function of the power part is to generate wind power. When choosing bottle blowing machines and plastic products, choose qualified manufacturers and products of better quality, and try to buy energy-saving bottle blowing machines..As a plastic product producer, the bottle blowing machine sprays liquid plastic, and uses the wind force generated by the machine equipment to blow the sprayed plastic onto the mold cavity of a specific character and pet blowing machine parts cool it to form the product to be produced. The electromagnetic heater increases the utilization of thermal energy by increasing the insulation layer. Usually it will save the remaining energy consumption of the motor.

The loss of heat energy caused by heat energy transfer, at the same time, its heating speed is fast, which improves the production efficiency. Let's take a look at how the energy-saving blow molding machine is realized! There are two parts of the energy-saving blow molding machine, namely the power part and the heating part. This method Greatly improve the production efficiency. Professionals remind you to pay attention to some plastic products made from waste bottle caps through recycled plastic granulators. It is recommended that you use less colorful plastic products in your life, especially plastic bags, because these products are usually unknown, chemical The ingredients may cause harm to health. Be sure to be vigilant of the irresponsible behavior of some unscrupulous merchants.

The other part of the realization is the heating part, which is mainly used to heat plastics into liquid. Generally, electromagnetic heaters are used to save energy. But we all know that the raw material of the bottle blowing machine is plastic, and it consumes electrical energy when it works. The power of the motor is changed by the frequency converter to adjust the input power to the power required by the motor, just like air conditioning Inverter air conditioner. It saves 30% to 70% of electric energy than the old-style resistance ring. It uses a frequency converter to save energy

1 Equipment With the 5 gallon semi automatic pet blowing machine suppliers advancement of science and technology and the scale of production, PET blow molding machines are becoming more and more automated and the production efficiency is becoming higher and higher. The equipment has high production capacity and high pre-blowing pressure. For preforms that have been heated for second use or preforms that have exceeded the storage time, due to the effect of time and temperature, the molding processes of the two are similar. The size of the pre-blowing pressure varies with bottle specifications and equipment capabilities.

The fabric of the lamp tube is generally in the shape of 'area' from top to bottom in the oven, with more than two ends and less in the middle. Together with PBT, it is collectively called thermoplastic polyester, or saturated polyester. Therefore, they have been widely recognized by the plastic processing industry at home and abroad. Among the domestic two-step two-way stretch PET bottle blowing machines, some models can not only produce ordinary PET two-way stretch bottles, but also heat-resistant two-way stretch PET bottles. In the application, it has been widely welcomed by users for its excellent performance and reasonable price. The volume of products that can be produced basically covers Imported equipment can produce a vast range from tens of milliliters of vials to 5-gallon vats. According to reports,

China ’s output of PET bottles was 3 billion in 1996, rose to 5 billion in 1998, reached 8 billion in 2000, 9 billion in 2001, 10 billion in 2002, and 13 billion in 2004. China's biaxially stretched polyester blow-moulded bottles started late in the plastic packaging industry, but since the introduction of injection stretch-blown PET bottle production lines from Japan in the 1980s, they have achieved good results in beverage packaging represented by Cola.

The production of ester (PET) blow-molded bottles can be divided into injection stretch blow molding (referred to as injection stretch blow) and extrusion stretch blow (referred to as extrusion pull blow) according to the preform of the parison. Although the manufacturers are different, the principles of their equipment are similar, and they generally include five parts: blank supply system, heating system, bottle blowing system, control system and auxiliary machinery.

7.Features of the automatic bottle blowing machine: 1. The automatic bottle blowing machine uses a constant voltage temperature control method to control the heating of the preform by the infrared lamp to ensure that the preform heating is appropriate, accurate and stable, and is not affected by the input voltage change.. The full automatic bottle blowing machine can be planned as a dual-cavity double-stretching cylinder, a three-cavity, three-stretching cylinder, a four-cavity, four-stretching cylinder, or a six-cavity, six-stretching cylinder according to different product requirements.

Each heating bottle machine factory zone of the automatic bottle blowing machine has independent segmented temperature control; the orientation and interval of the lamps and reflectors in the heating zone can be different according to the bottle embryo. 4. 3. 2. 5. The automatic blow molding machine control system has an automatic fault reporting function; when the operation is wrong or there is a problem, the computer will display and issue an alarm. 6. Fully automatic bottle blowing machine is suitable for blowing refrigerated and hot-filled plastic bottles or other plastic containers.

The conditioning uses a single-cavity single-stretching cylinder to meet different needs such as machine adjustment or mold trials. The molds of the automatic blow molding machine are easy and fast to replace. Shape and size can be adjusted to achieve the optimal heating effect. The production process is automated, and multiple machines can be combined together to form a fully automatic production line. There is no need to adjust the thickness of the mold within the range of the corresponding mold

Regarding some large beverage, mineral water or cosmetics manufacturers, due to the large amount of packaging used, they are often integrated with the product filling. On the one hand, it can reduce the cost of the initial purchase of the blow molding machine. Because many factors will be involved in the post-production process of the blow molding machine, as long as you find the right one, you can make the best use of it and produce the best benefits..

The types of plastics used in the blow moulding of hollow blow molding machines include polyethylene, polyvinyl chloride, polypropylene, polystyrene, linear polyester, polycarbonate, polyamide, cellulose acetate and polyacetal resin. Among them, the consumption of high-density polyethylene occupies the first place. It is widely used in food, chemical and liquid packaging. High molecular weight polyethylene is suitable for manufacturing large fuel tanks and barrels.

Polyvinyl chloride has been widely used in cosmetics and detergent packaging because of its good transparency and air tightness. With the development of non-toxic polyvinyl chloride resins and additives and the development of stretch blow molding machine technology, the use of polyvinyl chloride containers in food packaging has increased rapidly, and has been used in beer and other carbon dioxide gas-containing beverages. package.

Linear polyester materials are new materials that have entered the field of hollow blow molding machines in recent years. Because its products have the advantages of glossy appearance, excellent transparency, high mechanical strength and good preservation of the contents of the container, and the waste does not pollute the environment during waste incineration, it has developed rapidly in packaging bottles, especially pet blowing machine parts is most widely used in pressure-resistant plastic food containers. Due to the modification of its resin and the advancement of processing technology, the use of polypropylene has also increased year by year.

Equipment Co., Ltd. is a manufacturing enterprise engaged in the research and development of hollow blow molding machines. Over the years, the company has learned from foreign advanced technologies and combined with the company's many years of experience in producing hollow blow molding machines, it has a relatively mature set of production technologies and manufacturing processes. The company provides a full set of pre-sales and after-sales services such as installation and commissioning, maintenance, training, technical consultation and so on. With advanced technology, reliable quality, reasonable price and perfect after-sales service, the company strives to enable you to obtain high-quality products and services.